Got hooked on CNC when I first seen one in action on You tube,must have spent the best part of an hour or more watching these machines in action...Fantastic!

So I've bought me parts,constructing a bed which is still in the making.

Thought I'd try a dry run of getting the motors in operation and found its not as simple as I thought in getting them up and running so ifanyone could helpme out wiring themup from scratch I'd be ever so grateful :confused:

I think my problems stems around the breakout board which I purchased from DIYcnc
This is the PDF link to the info on it....
http://www.diycnc.co.uk/System1.pdf

The Drivers and Motors I purchased from ArcEuro Trade at an incredible lowprice.

This is the PDF link to the motors...
http://www.arceurotrade.co.uk/projec...-010-00400.pdf

And the PDF linkto the drivers....
http://www.arceurotrade.co.uk/projec...r%20Manual.pdf

If someone could kindly take the time and jot down where the wiring up should go I'd be eternally grateful,although I've managed to wire the components up right? Ijust cannot fo the life of me fathom out why I can't get the motors to sing in Mach3 and its really annoying me :confused:

George