Thread: in calculating the tool path
Threaded View
-
26-07-2010 #1
Last Activity: 11-08-2010
I am writing a simple hole generator in Processing because I can run it on the Mac and there is very little CAM on the Mac. So I have this generator that will generate G code snippets. However when it comes to the D shaped hole I ave hit a snag. The yellow is the hole I want to draw and the orange is the tool path. The two orange circles represent the limit of the tool path before going horizontal. The question is how do I calculate the position of these holes, given the diameter of the hole can change as can the tool diameter and the depth of the D shape. My maths isn't up to is could someone help please.
Last edited by irving2008; 26-07-2010 at 10:54 PM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Calculating timing belt lengths
By Jonathan in forum Gantry/Router Machines & BuildingReplies: 11Last Post: 10-12-2015, 11:32 AM -
Romi EZ-Path S Lathe crt replacement
By Nemo1966 in forum MonitorsReplies: 5Last Post: 07-10-2013, 04:25 PM -
Calculating Stepper Motor Power? Strength?
By antsals in forum General DiscussionReplies: 2Last Post: 11-07-2011, 12:18 PM -
Calculating torque settings for bolts.
By swarf-boy in forum Machine DiscussionReplies: 2Last Post: 22-12-2010, 12:18 AM -
Calculating forces on linear bearings ...
By Jonathan in forum Rails, Guideways & BearingsReplies: 7Last Post: 24-11-2010, 02:26 AM
Bookmarks