Thread: Wood Lathe - fitments
-
09-08-2010 #11
-
09-08-2010 #12
Ok Robin...don't bite me head off.
Its like someone going into a Fruit&Veg shop and asking for a pkt of band aid plasters.
-
09-08-2010 #13
Thanks for the replies - this is great! Robin - I do have a tailstock which is on the other half of the split bed, includes adjustment and centre, my interest in the faceplate was to have a go at a small bowl as a trial piece so I guess I need to get the diameter of the thread as was suggested. Thanks for the tips too, it is 40+ years since I last used a wood lathe!
GeorgeD - thanks too - I will peruse the forum further with interest.
-
09-08-2010 #14
Your lathe was obviously made by someone with a Picador catalogue, very possible a Picador spindle, you may find the thread size is in there, fittings may be available
-
09-08-2010 #15
Assuming right handed turner ...
I use the 45X45 method with my bowl gouges (fingernail grind)
1 Tool tip on centre line with toolrest as close to the blank as possible
2 Angle handle end of tool 45 deg away from your body
3 Drop handle end of tool 45 deg downward
4 Move the tool in until the bevel rubs the blank, gently twist tool anticlockwise until a very small section of the cutting edge starts to cut ... tooling must be 'scary sharp'
Others may use differing methods.Tim G-C
“I disapprove of what you say, but I will defend to the death your right to say it.”
(attrib. Voltaire but written by Evelyn Beatrice Hall "The Friends of Voltaire" 1906)
-
The Following User Says Thank You to Wobblybootie For This Useful Post:
-
09-08-2010 #16
... and you have to advance the tool as you head for the centre.
Fortunately, it takes so long to do your first bowl you will be an expert at this before you get to the finishing cuts
Don't be tempted to go thin, it will split when it dries out. If you really want to go thin season it some more after removing most of the wood.
-
The Following User Says Thank You to Robin Hewitt For This Useful Post:
-
10-08-2010 #17
I had a look on line, looks like Picador are mainly into polishing machines nowadays, I guess some parts are the same - car boot here we come!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Wood Router
By Buba b in forum DIY Router Build LogsReplies: 18Last Post: 03-10-2012, 09:49 AM -
T-Track and Fitments
By Karl in forum Machine DiscussionReplies: 2Last Post: 13-05-2012, 01:30 PM -
Laser marking wood
By artmin in forum Computer SoftwareReplies: 0Last Post: 17-02-2012, 05:58 PM -
FOR SALE: Coronet Minorette Wood Working Lathe
By AdCNC in forum Items For SaleReplies: 0Last Post: 21-10-2010, 11:54 AM -
Convert Wood Lathe from hand held tooling
By Wobblybootie in forum Milling Machines, Builds & ConversionsReplies: 8Last Post: 14-02-2010, 11:53 AM
Bookmarks