hi guys i have a KBelectronics speed controler KBLC-240D
not sure what horsepower resister to use with my motor


kbelectronics told me to use .18 ohm but i dont think thats correct as the resistor exploded
as soon as i turn on the power LOL qwickest £10 i have spent in a while



motor specs sherline mill motor

• Duty rating: Continuous--10 oz. in. at 6100 rpm, .85 amperes; Intermittent--30 oz. in. at 5500 rpm, 1.75 amperes (5 minutes on / 15 minutes off)

• Output horsepower: .06 KW (60 W) at 10 oz. in. / 6100 rpm

• DC voltage:90 VDC to motor (60 Hz)
• Speed in rpm: 6100 rpm continuous
• Class of insulation: Class A, 105° (C.) insulation system
• Normal full load current: .85 amperes • Starting current: 17 amperes instantaneous starting current (<100 milliamperes). This is also stall current in True RMS

anyone got any ideas???