I have a task on my college course now this is not cheating because I have scoured the net for any commands that go along with the G63 and nothing.
S the question is is there a fedd or ass commands that go with a G63 tapping command?

The material is 10mm 6082 ali and the tap is a 4mm all the way through and it is a tapered tap so it will have to go further to cut the full thread the job is in a vice so this is not a problem.
Any help would be great lol so far have hand writen this job and am up to line 830.
We have to do it hand first to show we have not used a CAM program and so the instructore can see the way we think as we are doing it( poor guy has to read it all and there is 5 of us on the same course)