Thread: new mashine build advice needed
Threaded View
-
05-10-2008 #1
I am a newbie in the CNC World
I am going to retrofit an CNC to and would realy like your advice J
The mil i have chosen is the Super X1L Mill (Long Table) from
www.arceurotrade.co.uk
To mount the steppers i need mounting kit and the best i have found is from www.cncfusion.com
the Micro-Mill CNC kit #1 there is one thing. I live in Denmark and here we have at import tax on 40% on anything importet from USA. Do any of you know any place in Europe that sells a comparative set ?
And the electronics i have chosen comes from www.diycnc.co.uk/
It is the system 3+ with the ekstra DRV25M (DRIVER25PS)board so i later can build a fourth axis on later
I have chosen 3 stepper motors (3 Nm Stepper motors NEMA 23) an a coresponding powersuply also from diycnc
Does any of this sound wrong to you am i missing something?
The thing that i would like the most i an usb based system but i have only found one NC4BU-KIT from techlf, but they are a little expensive and it only works with their own software..
Thanks
Finrod
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Advice needed on Amadeal
By croy in forum General DiscussionReplies: 13Last Post: 21-08-2015, 01:28 PM -
bit of advice needed for first mill
By jmac80 in forum Milling Machines, Builds & ConversionsReplies: 9Last Post: 06-04-2014, 10:59 PM -
BUILD LOG: my router build - advice needed
By thomashomer1986 in forum DIY Router Build LogsReplies: 10Last Post: 02-12-2013, 11:45 PM -
BUILD LOG: New cnc router build looming, advice needed
By Mad Professor in forum DIY Router Build LogsReplies: 5Last Post: 06-11-2012, 08:12 PM -
SPG X3 CNC Mill, advice needed please
By shaggyhawkings in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 07-01-2010, 11:00 PM
Bookmarks