Hi All,

Long story short, I am in the position of needing to sell an almost new CNC Plasma Cutter. I don't know a great deal about it and I'm no expert on these things so please bear with me.

The setup comprises
- 4'x8' EZ APC Made by EZ-Router Inc
- THC 300 Torch height controller
- A 4'x4' digitising tablet
- An 8 CFM Compressor
- A Millerweld 27 plasma cutter
- All the software included with the APC (Cut2D, SheetCam, Mach3D etc)
- Additional software for generating standard and custom HVAC joints etc
- The PC as supplied by EZ-Router Inc, all installed and working

I understand that this setup cost in the region of $17,000 US dollars. I will try to dig up copies of the original invoices just to confirm.

A single sheet of 2mm steel is all that has ever sat on the machine while we learnt the software etc, so it all really is in as new condition.

I have no idea what this equipment is worth second hand, but I'm guessing that most equipment is worth about 50% of new value. I'm happy to be corrected or nudged in the right direction if appropriate.

The setup can be seen fully working in Colchester, North Essex.

Kind Regards
Bill