Hello. I am hoping to design and make a router for hobby use just like many have done previously on this site, and I am currently putting together a concept and these are my current thoughts.
I am aiming for a working area of 1000mm x 1300mm (approx 3’x4’) and a Z of 130mm (5’’).
The main frame and gantry is currently 50x50x4 steel square hollow section with 25x25x2.5 bracing for the bed. This will be bolted together unless I find a good welder.

Click image for larger version.  Name: Frame1.jpg  Views: 2759  Size: 177.9 KB  ID: 4408

The linear rails are 25mm dia for the Y axis and 20mm for the X and Z, and hoping to use a 2510 ballscrew for the Y a 1610 ballscrew for the X and 1404 ballscrew for the Z. (hope I haven’t confused the X and Y).

Click image for larger version.  Name: Frame & Gantry1.jpg  Views: 915  Size: 253.5 KB  ID: 4409

Click image for larger version.  Name: CNC1.jpg  Views: 2844  Size: 251.0 KB  ID: 4410

I would appreciate your comments and constructive criticism as the design is easily changed at this stage before any serious money is spent. This is only a hobby machine and its main use will be engraving hard wood panels and cutting out the odd speaker panel.