. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-11-2011 #1
    p1lts's Avatar
    Lives in Lake District, United Kingdom.
    p1lts
    Last Activity: 15-03-2013 Has been a member for 9-10 years. Has a total post count of 21.
    I have a 1.5kW water cooled spindle. The machine was supplied with a 3000lph pond type pump. The problem that I have is, this pump is not really suited to this application as it is a high volume low pressure pump. When you connect this to the spindle, the pump struggles due to the back pressure caused by the small orifices in the spindle and it stalls after approx 10mins running. Obviously not ideal!
    Anybody found a suitable inexpensive solution.

    Perhaps this:
    http://www.ebay.co.uk/itm/UK-Submers...#ht_2427wt_922

    Ta.
    Last edited by p1lts; 03-11-2011 at 07:17 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Spindle Water Pump
    By Tomnewry in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 11-08-2013, 01:05 PM
  2. Cooling pump suggestions
    By martin54 in forum General Electronics
    Replies: 2
    Last Post: 13-02-2013, 09:07 PM
  3. water cooling options for spindle
    By routercnc in forum Tool & Tooling Technology
    Replies: 24
    Last Post: 12-02-2012, 11:22 PM
  4. (Video) Water spindle cooling system
    By jafc76 in forum General Discussion
    Replies: 0
    Last Post: 30-12-2011, 02:31 PM
  5. chinese spindle cooling
    By johngoodrich in forum Tool & Tooling Technology
    Replies: 11
    Last Post: 03-08-2011, 11:19 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules