Some parts.

[jcb121]

I got some parts water cut that aren't square on the edges. these will need to be milled down to get rid of the taper left by the water cuttingthey are an odd shape so It may be difficult to clamp in to your machines, if needs be, I'll re-buy the alu but hopefully it wont resort to that.the other part is a panel and a motor mount, It's just 20 holes and 4 slots. the motor mount is quite simple also.

I have the materials and postage is about £8 one way so that's fine for me to pay both ways.

Water Cutting.dxf



On the motor mount, the dashed lines are holes drilled from the side that will be tapped m6.

The Zig zags are the side that need to be taken down a bit and there are two of them.

If you guys think you can do it, send me a PM!

This needs to be done ASAP as I'm fed up of not having a cnc machine!

Thanks!