Good day all.

As per the title I am looking for advice regarding suitable timing pulleys and belts mainly for my Z-Axis.

I am using TR16x4D leadscrew, but will be looking at upgrading to 1605 ballscrew near the end of the year.

I am also using M60STH88-3008DF 3Nm Stepper Motors, 752 Stepper Drivers, eBay BT PSU @ 42.5Volts, Ethernet SmoothStepper.

My stepper motor can be moved forward or backwards, and from the leadscrew has a center distance of 75-100mm.

The absolute maximum OD of the pulley I can fit on the leadscrew is 50mm.

Can you please advice.

Thanks for your time.

Best Regards.