Thread: Replacing Servo motors
Hybrid View
-
04-10-2012 #1
So the machine had 1Kw servo motors on and a 300W servo motor will give you plenty enough power? Without getting more info on the machine it would be wrong to say that....
Even i am assuming that the motors are 1Kw, so i am unable to suggest the right motors without making an assumption.
If the motors are rated at 3000 RPM, they are 1Kw motors, that would give you about 3Kw of peak power. that is over three times what you suggested.
Going to steppers would be a big step backwards, even running them at 230V. While its a big step back, it will still work, but dont even think it will be close to what it was with the servo motors on.
Oh and the price of the 2M2280N has not gone up in price in 3 years. VAT is shown in the price at the moment, so an easy mistake to make.Visit Us: www.automationshop.co.uk
-
04-10-2012 #2
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
help with servo motors Please.
By ramsbury in forum Stepper & Servo MotorsReplies: 10Last Post: 18-02-2014, 04:59 PM -
FOR SALE: 400w panasonic ac brushless servo motors and drives
By gavztheouch in forum Items For SaleReplies: 3Last Post: 29-12-2011, 03:04 PM -
servo as a spindle
By Swarfing in forum Stepper & Servo MotorsReplies: 2Last Post: 27-10-2010, 12:30 AM -
Dc Servo Motors On Ebay
By audioandy in forum General DiscussionReplies: 0Last Post: 26-08-2010, 10:36 PM -
re servo encoder
By Scott in forum General ElectronicsReplies: 6Last Post: 24-06-2010, 08:30 AM
Bookmarks