. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-10-2012 #1
    dsc's Avatar
    Lives in Lincoln, United Kingdom.
    dsc
    Last Activity: 17-06-2020 Has been a member for 9-10 years. Has a total post count of 252. Received thanks 1 times, giving thanks to others 11 times.
    Gents,

    I'm trying to build an L shaped box which has a z axis assembly mounted on it. Looking for someone who can CNC the following in MDF, plywood or alu (it's a prototype to try out an idea, so I'm trying to keep the costs down):



    The plates will need holes for screws / bolts and a few larger holes for bearings. MDF / plywood would need to be 15mm, alu would be 10mm thick.

    The above drawing is a rough estimate of how many plates are needed and the dimensions, I can of course provide more precise drawings for the job.

    Regards,
    dsc.
    Last edited by dsc; 04-01-2013 at 04:26 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RFQ: Simple job cutting simple shapes out of camera lens cap
    By RockandGrohl in forum Projects, Jobs & Requests
    Replies: 15
    Last Post: 20-04-2013, 01:23 AM
  2. Break board 3-axis optical isolation, simple!
    By thjremy in forum Electronic Project Building
    Replies: 0
    Last Post: 06-04-2013, 04:42 PM
  3. stability - monolith vs. two-part assembly
    By dsc in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 24-10-2012, 03:03 PM
  4. Z axis assembly - unsupported rail for very limited movement
    By dsc in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 10-10-2012, 12:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules