7' X 4' Combi

[Ricardoco]

This will be a Router/Mill with Plasma,

Ok i should have started this thread sometime ago but i wanted to collect as many bits as i could to get a good start. So I used sketchup to give me the initial concept...


The first thing that was pointed out to me was that the Gantry may be a little too high and so thaat has been altered now.

the machine will eventually have an ATC and has 2 stations at the right side of the gantry for the most commonly used tools, and the rest on the front of the bed, there is also a Secondary 7" Touch screen with a custom mach layput to suit its size.
Here is also a picture of some of the goodies that will go to building it.



There was a few more additions to this but they wouldnt fit on the table...

Today i started work on the electrics box...



I will start the internals Next Weekend...

Rick