Quote Originally Posted by 2e0poz View Post
This goes back to offering alternative methods like angle iron to make brackets with nuts and bolts? Decent saw and a pillar drill are the basic requirements for any build. Master the art of a centre punch and people should be able to build quite an accurate machine.
Spot on 2eOpoz but in answer to Martin the investment of a £60 Arc welder is small compared to the alternatives of using So called easier materials like Alu profile. The extra in bolts, Angled steel and broken drill bits alone will cost nearly £60.
The investment in time learning to weld is not that great and can be achieved in just a few hours. End of the day where only talking small short welds here, not much more than tack welding really and if someone can't learn to weld to that level in half a day then I severely doubt there chances of building any machine that requires precision drilling and patience.?