Thread: Stepper motor tunning wiring
-
09-01-2013 #31
Also there is nothing connected to the 'enable' terminals?
If the nagging gets really bad......Get a bigger shed:naughty:
-
09-01-2013 #32
yes ill take terminal covers off , the x any y motors are bigger than the z, i first got it with all the same motors , and sthing in the control unit arced out on the ox , so when i tok it back he up graded the the drivers ect and changed the 2 motors ,
-
09-01-2013 #33
hold fire.. i'm gonna draw you what jazz is on about.. it's a really simple fix for you trust me
-
09-01-2013 #34
pul+ dir neg
-
09-01-2013 #35
-
09-01-2013 #36
wrong pul + dir +
-
09-01-2013 #37
-
09-01-2013 #38
Better details in the manual here
Stepper Motor Driver 4.5A, 50V CNC MicrosteppingIf the nagging gets really bad......Get a bigger shed:naughty:
-
09-01-2013 #39
so just moving both ends of the link wire to the left one terminal ?
-
09-01-2013 #40
Ok really this needs checking all the way back to the breakout board (Board with cable to parallel port)
EDIT: Forget what I said after 2epoz posted that link and seeing the breakout board then it's wired correct for that board.
Going to PM you my phone number so we can chat sometime because without all the details then things could go wrong and easily blow a drive.
Shouldn't be difficult to sort but it does need all wires checking from the beginning and trying to do this via forum is asking for trouble.Last edited by JAZZCNC; 09-01-2013 at 01:24 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stepper wiring/colour coding
By rwb97 in forum Stepper & Servo MotorsReplies: 24Last Post: 23-06-2014, 11:34 AM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
CY or SY cable for stepper motor wiring?
By Jonathan in forum General ElectronicsReplies: 6Last Post: 26-09-2010, 06:25 PM -
Stepper motor wiring
By Buba b in forum Stepper & Servo MotorsReplies: 5Last Post: 28-03-2010, 06:16 PM -
Stepper Motor Wiring (Screened?)
By pequod in forum Stepper & Servo MotorsReplies: 19Last Post: 03-08-2009, 10:15 AM
Bookmarks