We started with a Kress 1050 fme and that worked well we ended up putting 8 sets of brushes in that router. When that router died we bought another that router did quite well having about 6 sets of brushes in i,t then that one burnt out. While this was going on we had another machine built to take the Kress routers.Then we started having problems the next router we bought lasted 5 hours and burnt out, needing to keep the machines that these routers fit ingoing we bought another this one lasted about 4 hours. We bought another while all previous routers where being repaired this lasted 15 hours being nursed very carefully.By this time we had bought 5 of these Kress routers and all had burned out. I find it very strange the first 2 routers did alot of workand the last 3 barely got warm before they died.
out machines are manual feed and we are using quite small cutters. Has anybody else had problems with these routers as Kress in Germany are trying to blame me.