. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 04-04-2013 #18
    Carlb1058's Avatar
    Lives in Sydney (Ex-Cardiff), Australia.
    Carlb1058
    Last Activity: 10-09-2013 Has been a member for 8-9 years. Has a total post count of 77. Received thanks 1 times, giving thanks to others 3 times.
    Quote Originally Posted by John S View Post
    Recheck Y in a couple of places and in both directions
    Reason for this is 62 mm doesn't work out to a normal pitch and you did say y was jerky.

    I'm wondering if you have a loose coupling or similar ?
    Just measured it at centre of table and the other end to original and still got 62??

    Addon bit: Just re-checked and made sure all connections were tight and they were, this is where it gets weird again - using a spanner on the opposite end of the Y screw I turned it 20 got 80mm, turn the knob on the end of the motor and get 62 but if I try and tighten the grub screws up any more all I succeed in doing is bending the allen key????
    Last edited by Carlb1058; 04-04-2013 at 12:50 AM.
    Cheers
    Carl

    -----------------------------------------------------------------
    Cardiff City Supporter ~ Real Sporting de Gijon Supporter ~ Vintage Synthesizer Collector
    La gente dice que tu vida esta planeado, me gustarķa encontrarse con el jefe de planificacion para que yo pudiera darle un punetazo en la cara!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Yet another Chinese 3020 CNC upgrade thread!
    By Pointy in forum Machine Discussion
    Replies: 31
    Last Post: 18-02-2014, 01:04 PM
  2. A decent little (PCB miilling) Chinese machine...
    By HankMcSpank in forum Machine Discussion
    Replies: 5
    Last Post: 18-06-2013, 06:59 PM
  3. Chinese CNC machine modifications - Discussion
    By craigrobbo in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 14-05-2012, 06:51 PM
  4. Electronics upgrade for an existing machine.
    By Shinobiwan in forum Electronic Project Building
    Replies: 9
    Last Post: 18-03-2012, 04:01 PM
  5. Chinese CNC machine...whatchathink?
    By HankMcSpank in forum Chinese Machines
    Replies: 21
    Last Post: 11-04-2011, 05:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules