Small metal Lathes / IE 350 to 50W machines

[mekanik]

Hi dudz
I only had a look @ the Elliot as i bought a new Emcomat 7L about 30 years ago,desperately wanted the the V10 but way out of my price range @ the time, my user manual includes the Emcomat 7 & the Maximat V10, if you have a look @ the support bracket @ the end of the bed you will notice it seems long, this is because there should be a feed shaft below the leadscrew(the one with the handwheel) the machine looks like it's has had a rough life and without the feed screw being present the operator will more than likely have been using the laedscrew for feeding the saddle so could be well worn if it was in better condition it would have been a nice machine & the vertical column is very handy, i have one on mine and can do light milling & gear cutting. You could check to see if spare are still available.