Spindle for sable 2015

[robump]

Hi everyone,

I have just ordered a sable 2015 and am on the lookout for a spindle solution.

I will be using it to mill PCB's and possibly the off bit of acyrilic if the machine is up to it.

Ideally i would like to have a go at building a spindle but i dont have access to a lathe so cant make any parts which is unfortunate.

Ultimatly i think i have 4 options and would appreciate your opinions on which you guys think is most appropriate, i ahev listed them below:

1. CNC on a budget spindle I would need to import this from the US but some people on CNC zone say its a good spindle.
   
2. 400w Chinese spindle I am unsure about the quality of these and not sure what the runout will be like
   
3. SPD-ER11 Seems like it good be a good bet, plenty of videos on youtube with the sable using this spindle. Has anyone on here used one?
   
4. Last option is a 0.8KW water cooled spindle, one like this I understand this is similar to the very popular 2.2kw spindle that a lot of people use on here for larger machines and i could possible use the VFD again when I inevitably want to build a larger machine!--------Not suitable - Too heavy

There may well be some other spindles that i havent considered that would be more appropriate and would appreciate any advice!

Thanks in advance