Hello guys, my name is Juan Pablo from Argentina, I am building my first Cnc and I need help deciding the electronic components for the CNC. I can spend about 600 dollars in my proyect (shipping included) and I am trying to choose wisely what to buy. I was researching because I do not know much about electronics. So let me ask you a couple of questions: first, is the Am882 driver good? Is it difficult to make it work? Because I have read on this webpage that there have been problems with its installation. I am planning to use them with a nema 34 1200oz or a 1600oz I really need help because I donīt know which power supplies and breakout board I should buy if the c10 works fine with these drivers or if I have to buy another. Well guys thank you! I really appreciate if you could help me with this! THANKS

These are the products I can get in my country:

3PCS CNC NEMA34 Stepper Motor 1232OZ-IN,6A,118mm,4leads 257uss
3 pcs am880 180uss
1pcs 6 axis cnc breakout board DB25/ interface board adapter milling engrave c10 18uss
Power supply :
350w 36v 10a 38uss
350w 60v 5,9a 41 uss
400w 48v 8,3a 44uss
420w 60v 7a 59uss