Thread: Proximity limit switch problems
Threaded View
-
16-01-2014 #5
Right I've had another go at this.
Eddy I tried wiring as per your suggestion. The lights on the S box came on and Mach 3 seems to look right too. Only thing is the switch doesn't trip when I move it towards metal or anything else for that matter.
3 of my switches don't light up the box at all when wired up in the same way as the one which seems to work. Its making me wonder whether I have a batch of duff switches?
This is how Marchantdice explained the wiring:
I've just taken one of our S-Box controllers to bits, the wiring for the limit switches and e/stop is as follows
Switches Connector Control Board Prox Switch - Browns Pin 1 VCC Prox Switch1 - Black Pin 2 S1 Prox Switch2 - Black Pin 3 S2 Prox Switch3 - Black Pin 4 S3 Not Used Pin 5 S4 E/Stop - Yellow Prox Switch - Blues Pin 6 Ground Not Used Pin 7 Not Used E/Stop - Green Pin 8 E-Stop
I've added a picture of what I wired together.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Proximity switch NPN or PNP
By Matt81 in forum General ElectronicsReplies: 9Last Post: 19-04-2014, 11:38 AM -
Limit switch issues?!?
By jonbabbz in forum General ElectronicsReplies: 10Last Post: 06-02-2014, 07:37 PM -
One limit switch per axis
By EddyCurrent in forum General ElectronicsReplies: 17Last Post: 30-09-2013, 11:38 AM -
Proximity Sensors as Limit Switches ?
By Lee Roberts in forum General ElectronicsReplies: 5Last Post: 03-10-2009, 07:04 PM -
Limit switch's - best configuration?
By HiltonSteve in forum General ElectronicsReplies: 16Last Post: 13-08-2009, 01:26 PM
Bookmarks