Threaded View
-
31-01-2014 #11
I managed to solve the issue with the V/F mode. There is are PD.00-05 settings in the VFD which are not mentioned in the original manual but described in a manual for a similar VFD (CHE100): http://platforma.astor.com.pl/files/getfile/id/4040
Setting PD.03 (Amplitude restraining oscillation) from the default 5000 to 0 lets the drive to go all the way down to 0Hz without tripping. Of course there is little torque left when rpms are below 6000.
Still no luck with vector mode.Last edited by kajuk; 31-01-2014 at 12:47 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Build Log: Servo Drive and VFD with vector control
By Jonathan in forum Electronic Project BuildingReplies: 17Last Post: 05-04-2015, 07:58 PM -
Need help with a sensorless vector VFD and 2.2kw motor.
By kajuk in forum Spindles & Drive MotorsReplies: 0Last Post: 29-01-2014, 06:09 PM -
Vector Linker , thermic cutting
By CNCtoolsWorld in forum Manufacturer NewsReplies: 0Last Post: 28-02-2013, 04:55 PM -
bitmap to vector conversion
By GEOFFREY in forum Computer SoftwareReplies: 16Last Post: 29-12-2012, 06:32 PM -
Vector graphics AKA CAD for free
By m.marino in forum Computer SoftwareReplies: 1Last Post: 15-01-2009, 02:17 AM
Bookmarks