Thread: On going chinese 6040 problems
Hybrid View
-
11-09-2014 #1
I don't know what it's designed to do but it sounds like you are not far away, why not just use the machine as it is until you find your requirements have outgrown it.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
11-09-2014 #2
Interesting. The supplier is offering a partial refund on the machine. As I told them I was going to put a PayPal claim in . If they do I will up grade what's I need to with the cash they give me back
-
22-09-2014 #3
ok so im still having problems with this thing jamming . So i put a paypal claim in and this is what i got back from paypal
To continue with our investigation, we need documentation to support your
claim that the item is damaged or significantly not as described.
Please obtain a document from an unbiased third-party, such as a dealer,
repair shop, appraiser, or another individual or organisation that’s
qualified in the area of the item in question (other than yourself), which
details the extent of the damage or clearly explains how the item received
significantly differs from the item that was advertised.
This document must be on a letterhead that includes the name, address, and
phone number of the individual, business, or organisation so that we may
contact them if necessary.
If applicable, the document should include a serial number and description
of the item and the cost required to complete any necessary repairs.
You can upload this document through your PayPal account. Here’s how:
How an i gonna do that i dont know any one that fixes cnc machines and i cant really post it to some one now can i ?Last edited by amxen; 22-09-2014 at 09:26 AM.
-
03-06-2020 #4
hi,
i had same problem as you. the fix for this: The problem not with your setting in mach3 or the driver board.
The problem is the wiring. your wiring need be fix.
1. the wiring a attach to the power supply with tire wraps. That's A NO NO. remove it from power.
2. In that box, You need use 4 wire shielded cable for each stepper motor, from contoller board to the 4 pin connectors.
3. You need to put EMI AC filter. remove the one that come this box it's cheap chinese make. You can one on amazon $10 USA made.
4. You need to use 4 wire shielded with GND wire. 4+GND, For DC power. 2x red/2x blk plus shielded wire for GND.
Don't get confuse with the AC Ground wire and DC Ground, They must be separated.
5. And Most important (REMOVE) VFD from Box, This VFD is **Shielded** attach to outside with plastic mounts. No metal contact between VFD and Box Controller.
6. The stepper motor cable's from Box to stepper motor MUST be shielded cable 4pin wire + shielded GND.
I did this my 6040 and has been work 100%
Good Luck.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New 6040 owner looking for advice from others with a chinese 6040/3040
By itsmillertime in forum Machine DiscussionReplies: 12Last Post: 14-10-2019, 08:30 AM -
Chineese 6040 problems
By Kendrick57 in forum Gantry/Router Machines & BuildingReplies: 18Last Post: 18-10-2015, 10:52 PM -
Chinese 6040 from uk eBay seller x axis problem
By CommanderKenyon in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 20-02-2015, 02:13 AM -
my 6040 experience (yeah, and problems) so far
By jimbo_cnc in forum Machine DiscussionReplies: 52Last Post: 07-10-2014, 11:26 AM -
Chinese 6040 CNC Router Advise Needed
By Bob Hepple in forum Chinese MachinesReplies: 24Last Post: 27-11-2013, 12:00 PM
Bookmarks