Hybrid View
-
24-09-2014 #1
Please do not buy any components yet, get a design together ask for comments and the guys will make sure you don't order anything unsuitable, if you can possibly stretch to profile rail this will make a far superior build, there is a company called FSA that trade on ebay that sell second hand rails and Jazz for one has had good results using that kit.
Good luck on whatever you decide.
Mike
-
24-09-2014 #2
Yes don't buy anything yet, It's the worst thing you can do and classic mistake.
Another thing is don't rely on the sellers to advise because they will only try to sell you what they have in stock or need shut of. Often this or some of it isn't the best for your needs so just hang fire and check with us here before ordering.
Start with design and then work from there. Motors and drives sat on a bench are just wasting warrenty and you can bet your last dollar they will be out of date by time machines built and cutting.Last edited by JAZZCNC; 24-09-2014 at 03:54 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Limit switch issues?!?
By jonbabbz in forum General ElectronicsReplies: 10Last Post: 06-02-2014, 07:37 PM -
Advice please! JAF Motion Controller issues!
By Mark Chard in forum Machine Control SoftwareReplies: 0Last Post: 31-01-2014, 05:03 PM -
Page layout issues...
By irving2008 in forum General DiscussionReplies: 3Last Post: 09-08-2012, 08:10 PM -
Cable + Connector issues
By tom3d in forum General ElectronicsReplies: 0Last Post: 09-01-2012, 07:56 PM -
Number plate dies and a Sieg KX3 CNC Hobby Mill
By p4tvw in forum Milling Machines, Builds & ConversionsReplies: 5Last Post: 14-04-2010, 04:51 PM
Bookmarks