picture conversion to DFX/ Gcode. Help required please.

[njhussey]

If when in CAD you select the top 5 characters by left clicking just to the bottom right of the 5 characters and then stretch the selection rectangle round all 5 characters you can then select the move command and if you have F8 pressed (ortho mode) you can then move them (pick any point as the reference point) up at 90° to the C.....

[Gasgasbones]

If when in CAD you select the top 5 characters by left clicking just to the bottom right of the 5 characters and then stretch the selection rectangle round all 5 characters you can then select the move command and if you have F8 pressed (ortho mode) you can then move them (pick any point as the reference point) up at 90° to the C.....

Thank you Neil, I will have a go. Still learning ! :-)

[EddyCurrent]

Here's 3 files with different distances as indicated in the file name.