I would like to say I have been reading this site for the past 6 months and have read quite a few post on the subject.

i would like to build a steel table similar to silyavsky design but don't have 80 x 80 box section but do have access to 60 x 60 4 mm wall box section.

Question

1/ can an I use 60x60 box section for the table.

2/ would the 60x60 be suitable to use the poxy self levelling

3/ I would like a working area of 48" x 48" so what would the table size be. Thinging of building it 62" squarish. And about 36" height for the work area.

thanks in advance any help would be helpful.

Ps
the main thing I would be using the Dnd router for would be for cutting 90x90mm timber, ply, mdf and plastic and if it's sutable Ali some times.