-
21-02-2015 #31
-
21-02-2015 #32
Fr the power problems with the usb what about a powered hub then the usb power is not coming from the laptop.
The spindle has 4 pins coming off it more than I would expect from DC maybe brushless with a backemf sensor wire.
kendrick
-
21-02-2015 #33
See in this other thread; http://www.mycncuk.com/threads/8457-...7150#post67150 too many threads for same thing.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
21-02-2015 #34
-
21-02-2015 #35
Your Correct no point having 2 threads open for the same Cnc. This threads problems have now been sorted, can any future comments be passed to a more generalised thread about any problems I have with the 6040. Go to
http://www.mycncuk.com/threads/8457-...7115#post67115
kendrick
-
21-02-2015 #36
-
07-10-2015 #37
I have a UC300 which I've used with Mach3 and was better than just the parallel port on the PC. I now use it with UCCNC and it's another big step up from using it with Mach3. UCCNC and UC300 are designed for each other, with Mach3 you're relying on a third party plugin sitting between Mach3 and the hardware. UC300 is a good option if like me you want to add more sensors like probes and FR override control. The other advantage is you can move beyond WinXP/7 on your controller PC which when you also use it for running Vectric software is a huge advantage. Running mine on a Win10 machine and it's as happy as Larry.
-
05-01-2020 #38
Can you run a UC100 with t2 laser/CNC Software? I can't get it to comunicate wih the USB on my notebook pc! Please Help.
Thanks in advance!
-
05-01-2020 #39
-
05-01-2020 #40
Thanks, I tried hard to get it to work! Would you buy Mach3 Mach4, or UCCNC Software? I would like to run it unders windows 10 ona newer P.C!
Thanks again for your help!
Tom Megna
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
USB TO Parallel Port DIY Interface
By Lee Roberts in forum Electronic Project BuildingReplies: 42Last Post: 17-02-2018, 07:46 PM -
breakout board usb or parallel
By crossleymarko in forum Motor Drivers & ControllersReplies: 13Last Post: 30-07-2013, 12:44 PM -
PCI parallel card / BOB
By artmin in forum Computer HardwareReplies: 11Last Post: 30-01-2012, 04:38 PM -
parallel port address
By Dan Brown in forum Artsoft Mach (3 & 4)Replies: 6Last Post: 07-01-2010, 12:04 PM
Bookmarks