Good afternoon all.
I've been working on getting my chester 20v mill to be as accurate as possible with it at the moment being .2 out.
I've used a DTI to check for backlash and gone x -10 the back to zero and it is great using g0 command.if I move the machine on feed to say -5 then go back and forward quick then back to zero the machine is showing 0.22 deviation.ive taken the machine apart today ad I'm going to convert it to ball screws if I can find the right screws etc.Just before I go ahead and buy the kit I wanted to just ask to make sure this will help eliminate the issue.

Any help much appreciated.

Luke