need help with choices for cnc

[jas46]

First off hello I'm jason and have been lurking for a while trying to digest all the info and opinions everyone has given.
currently I complete all my work by hand on my mini sieg x1mill and sc2 lathe not the best I know but they complete the work I need very well lol.
now the problem, I want to have a cnc machine that can mill aluminium parts for RC projects and can mill wooden frames for the Mrs's projects.
So do I modify the x1 for cnc and ignore the fact the table is too small to complete the Mrs work or do I by a cnc router and only be able to complete her work, I am stuck for ideas.

I currently have a budget of 1k (I already have the software/PC) and am not keen on buying an eBay cnc router as I read so many bad things and with me not working I can't afford to waste a grand, I'm not over keen at building a cnc router as I don't know enough about them to build them well enough but if i need to i will.

So my long winded first question to you all is ....what would you do ?

Sorry for the long explanation and thanks for any help advice you can give

Jason

[Lee Roberts]

Hi welcome to the forum,

I wonder how much it would cost to convert the X1 and buy one of the Chinese machines for her in doors say a 3040/6040 machine, you wouldn't necessarily need to go mad on the electronics for the mill as anything less involved than (by hand) would be a step forward, as time passes, upgrade as you need to.

.Me

[jas46]

Thanks Lee
I have thought about doing both, but my shed is tiny I currently have the mill, lathe, drill, bench grinder,tumble dryer lol and enough room for me just to stand.
I've got the cost to about £400 for converting the x1 that's with me making the nema mounts.
I'm in two minds with the Chinese routers as it's only for small wood stuff like routing flowers into the edges of picture frames and routing butterflies from balsa crafty sort of stuff But I begrudge buying cheap stuff now as it never lasts or is so out of balance I'm forever modifying it or buying replacement parts for it .

Trouble I've got is this 1k is all I am going to have for a long long time as I can't work due to ill health so upgrade later is not an option really so I have to try and get the best option for the long run

Thanks

Jason

[Lee Roberts]

Thanks Lee
I have thought about doing both, but my shed is tiny I currently have the mill, lathe, drill, bench grinder,tumble dryer lol and enough room for me just to stand.
I've got the cost to about £400 for converting the x1 that's with me making the nema mounts.
I'm in two minds with the Chinese routers as it's only for small wood stuff like routing flowers into the edges of picture frames and routing butterflies from balsa crafty sort of stuff But I begrudge buying cheap stuff now as it never lasts or is so out of balance I'm forever modifying it or buying replacement parts for it .

Trouble I've got is this 1k is all I am going to have for a long long time as I can't work due to ill health so upgrade later is not an option really so I have to try and get the best option for the long run

Thanks

Jason

Np,

So really then it's going to be a question of "what one makes you both more money, it sounds like your balance is that you have more time then you do money, if thats true then consider that into the equation, the faster you can produce the stuff paying the bills the faster you'll have both time and money :), then you get to play with a cnc mill AND a cnc router.

I'm in a similar position at the moment due to my own health, so it's really frustrating I know. Just got to keep your head up, walk tall and do what you can till things get better.

Don't forget, the mill could do woodwork as well, may not be an ideal way to manage wood but it could still be productive if you can make it work for you

.Me

[jas46]

Lee
Yes it seems that way I certainly have the time, the Mrs works full time in place of me now so the time is all me ....... hmm seems you've help me answer the question.

I've been searching the forum for what's best and have come to the conclusion to build a fixed gantry router as I should be able to build it to suit both our needs, if I aim for it to be able to cut aluminium it should be able to route what the Mrs needs.

I mean I'm not talking industrial size here the cutting area only needs to be 400mm x 400mm and to be fair any bigger and it won't fit in the shed lmao.

Jas

[JAZZCNC]

Never the twian shall meet.!! . . . . That is wood and Mills. . .Lol

If you have a Mill then my suggestion is keep it just for work that requires slower speeds and feeds. Both Aluminium and wood require much higher feeds and spindle speeds to get the best from them. Mill with only 3000-5000rpm and high pitch screws will struggle badly with wood and be slow when cutting Ali.

So really with only a Grand then it's a no brainer you have to DIY. The Chinese machines are ok for learning on but if you want to earn some money with it and be pushing then they will let you down quickly.

Then with only a Grand you won't have any room for error or wrong buying if you take the DIY route. So consider this choice carefully has well.
My best advise is if DIY route then save a little More.? Another £500 will see you with a much better machine.

The fixed gantry setup at this size is good choice but it will take more room than moving gantry giving same cutting area so bare this in mind.

If you do take the DIY route and time isn't a pressure then Throw up a Thread and We'll help you with design and buying the right stuff from the right places.

Me personally I will offer now to help you with both Design/Electrics and cutting any parts if you take the DIY option.

Good luck and tread careful because a Grand isn't alot and can be wasted quickly when it comes to making wrong choices with CNC.!