Quote Originally Posted by Clive S View Post
If you really want to connect the VFD through the contactor then just the live would be fine (and not the N or E), but having said that I suppose it depends on the power system to your building as it may be different than the UK.


I personally would not connect the mains VFD through the contactor but would just connect the signal wire to make it stop.

The DC output from the power supply should not go through the contactor either .

Perhaps you should find somebody local to give you some help with this before you get a chance to damage it all or yourself.
hmm well I seem to remember reading that it's safest to turn off power instead of just relying on signal coming out of the devices(drivers,VFDs)
and the examples in the CSMIO show it this way.

also I would like to you utilise the software to enable a power on signal