Thread: Aligning Gantry
Threaded View
-
16-01-2016 #1
Hi,
I have a mill running from Mach 3 and an Ethernet Smooth Stepper. I have 2 motors on the Y axis and 2 micro-switches for homing.
Sometimes I forget that soft limits are off and run in to the switches that I then need to glue back in place and my gantry no longer homes perfectly square. I use small shims on the gantry to get the switches triggering at just the right position.
Is there a way to simply adjust the alignment in software? I bet there is, I'm fed up of doing this manually with shims!!
Thank you!Last edited by Tenson; 16-01-2016 at 04:36 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
By D-man in forum DIY Router Build LogsReplies: 57Last Post: 13-12-2019, 10:43 AM -
Gantry Router
By stevep in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 04-05-2015, 09:01 PM -
New Gantry Ideas
By Tomnewry in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 05-02-2014, 10:00 PM -
Hybrid gantry
By routercnc in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 17-04-2012, 08:09 PM -
Looking for some help designing my gantry please
By psiron in forum Gantry/Router Machines & BuildingReplies: 13Last Post: 05-07-2010, 09:52 PM
Bookmarks