Threaded View
-
03-04-2016 #11
Last Activity: 19-01-2024
Run wire from the FWD to the Relay Output on the Bob and back to Gnd on VFD. Then Set PN04 = 2. This will take care of ON/OFF provided you Enable the output in mach3 and assign the output number in Spindle setup.
For speed control you need to take the 10V from BOB to 10V-IN on VFD. 0V form BOB to Gnd on VFD. Set PN03 =4.
This will take care of Speed control provided you set it up correctly in mach3.
To be honest Don't like the fact the Analog 0v doesn't appear to be islolated from common Gnd but your stuck with that I suppose.
-
The Following User Says Thank You to JAZZCNC For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Gerber system 48 cnc router for sale
By Ahmed in forum Items For SaleReplies: 0Last Post: 22-04-2015, 12:11 AM -
gerber system 48 plus sizing problem
By nodgeruk in forum Machine DiscussionReplies: 1Last Post: 17-09-2014, 05:53 PM -
Gerber system 48
By martin54 in forum Milling Machines, Builds & ConversionsReplies: 67Last Post: 13-09-2013, 12:35 PM -
BUILD LOG: Gerber system 48 conversion
By martin54 in forum DIY Router Build LogsReplies: 14Last Post: 25-08-2013, 11:29 AM -
Gerber system 48 Plus router
By poppa jock in forum Machine DiscussionReplies: 0Last Post: 29-07-2013, 05:43 PM
Bookmarks