Thread: How properly to install the rack
Threaded View
-
06-02-2016 #1
Do u thing i nessecerly need to do a face milling of my 80x80x5mm steel tube to mount the helical rack M1.25?! If i mill it lets say 1.5mm the wall thickness will be 3.5mm which is not enough to screw the rack on the tube. I plan to weld a steel piece on the top of the tube and than face mill it and mount the rails, but i really dont know what to do with rack.The gear and the linear rail are fixed, and i can not move them and i only can play with the steel tube
Looking forward for some advices.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
top mounted ballscrew, would it work properly ?
By Rory13 in forum Gantry/Router Machines & BuildingReplies: 6Last Post: 10-06-2015, 07:21 PM -
Ballscrews or rack and pinion? What module of rack and pinion is the best?
By masinecc in forum Rack & Pinion SystemsReplies: 7Last Post: 14-04-2015, 02:16 PM -
asks for help to install stepper motor
By ali hedi in forum Motor Drivers & ControllersReplies: 11Last Post: 06-10-2009, 09:23 PM
Bookmarks