Threaded View
-
10-04-2016 #11
Thanks for that, explains a lot then ;) Don't think I've ever used RFH...reaches for manual ;)
I think for what I am doing - small batch production - saving the offsets is a good idea??
All the raw plates are pre-cut to the same size and pre-drilled for fixing to the bed so each part will always start in the same position or work-offset.
Is that what offsets are for?
Could I then have re-homed the machine and loaded the offset then carried on with part I had stopped on??
Lots to learn....
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Beginner Moving Gantry Build? Read This!
By Tenson in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 23-05-2018, 05:30 PM -
Garage CNC - A gantry style machine design
By fandango in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 21-03-2014, 01:38 AM -
Truss style Gantry
By D.C. in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 15-12-2012, 07:23 PM -
A few questions to start a DIY mini CNC
By purple_rob in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 03-08-2009, 11:08 PM -
Vertical moving gantry????
By Ross77 in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 03-06-2009, 08:34 PM
Bookmarks