Denford Mirac conversion help

[John S]

Smooth stepper can't thread yet either, It was promised 4 years ago mind you .........................

[m_c]

If you go to the Denford forums (www.denfordata.com/bb), you can download the TOE80 manual in the Mirac section (it's also in the Cyclone section).
It gives all the details for inputs/outputs and the required timings.
.
John, the Smoothstepper can do threading using a single slot sensor as I used it on my old Conect lathe.
It's encoder threading that still hadn't been implemented the last I checked. I suspect the real reason for the lack of progress is the physical hardware doesn't have the capacity to implement it. I know the last discussion I seen about it, Greg was talking about optimising/freeing up resources, so I think it's another case of underestimating the hardware requirements, aka Gecko GREX and various others.