Project Beaver

[OMLCNC]

Thanks for the advice and feeback Clive



3) Nema 23 all round with low inductance and decent drives (AM882 or EM806) are good BUT think about moving them to the back of the machine and (if I had my time again) change the X to 1 x nema 34 and use long belt for the two screws. This give you a better choice of motion controllers and less problems with homing etc.


I will have a redesign based on your comments, stick with fix bolted bed that could be movable in the future to cover all options.

[Clive S]

I have about 4 positions that I can mount my bed in (bolted) But never need to move it. machine 1600 x 1000