CNC drill bit conundrum...

[HankMcSpank]

Hank
Also on ebay
http://cgi.ebay.co.uk/CARBIDE-DRILLS...d=p3286.c0.m14

Peter

Thanks Peter...I can see why my search didn't locate that ad - I tried to find those ads with 4.2mm and 3.2mm in the ad body or 4.20mm and 3.20mm, (ie second decimal place) but look what he's done

Extract from his ad...


"4.20MM DIAM .WITH 3.2MM SHANK"

so I was caught by the seller's inconsistency! (also some sellers use the word 'shafts' others 'shanks' ...it all adds up mto a lot of permutations and possible 'misses')

Thanks once again

[ptjw7uk]

Never have understood searching on Ebay as I have spent hours trying to find stuff I know I had seen on there a day or 2 earlier.

I do know that searching is the hardest think to program for as the slightest variation will give a no finf result bets to try wid cards if possible.

Peter