Quote Originally Posted by Nealieboyee View Post
I went with the 50x50mm because it was free for 7.5m length :). If I go to 80x80mm, I will have to shrink the height due to the cost. The new 80x80mm design would look like the one attached. What do you think? I've also increased the free space between cutting bed and spindle to 130mm. My gantry is already 120x80mm.
Well free is the magic word :-)

Just make sure ther is enough meat to tap threads in for the linear rail bolts.

Also you need at least 4cm of width flatsurface to pour epoxy on the steel.
Make sure you have that.

Grtz Bert



Verstuurd vanaf mijn SM-A320FL met Tapatalk