-
07-02-2020 #41
Stan's had a change of heart...
I just noticed he's gone to the thread I made for him and deleted all the content from each post: http://www.mycncuk.com/threads/13375...Trace-software
Sometimes I hate having to be "correct" when I'd really like to say something else...
Thanks for wasting everyone's time Stan, you could have at least shown me the respect I showed you and replied to my email..Me
-
The Following User Says Thank You to Lee Roberts For This Useful Post:
-
07-02-2020 #42
Sometimes you can't please everyone no matter how hard you try.
Thanks for your efforts Lee, I'm certain they are always appreciated by the 'regulars'.
-
07-02-2020 #43
I may have contributed to his departure,but have no regrets about honestly expressing my lack of interest in his gadget.One thread would have been sufficient and if you check his dedicated sub forum at CNCzone,which I did after seeing the same thread here and there,you will see almost no replies to any of the posts that spread over six pages.It is a minority interest topic and I don't know if he was posting so much to convince his wife that the considerable sum he must have spent was justified or if he is involved in selling the hardware.
There are other ways of digitising 2D objects and there is software to take the drudgery out of a lot of it.I will say that if somebody wants to start a thread about building your own 3D digitiser I will be very interested indeed.Moving a digitising puck and clicking when the cross hairs align with a feature isn't exactly cutting edge stuff these days and once entered into a CAD system it becomes the stuff we all use with machines.
Thanks go out to Lee for filling out the picture and for maintaining his patience during the saga.
-
07-02-2020 #44
Never going to get an answer to the question about why one takes a design in electronic form, prints it, and manually digitises it in order to get to an electronic design. Still mildly baffled! Strikes me as being a bit like putting a pen in the router spindle, using it to draw the profile required, and then cutting it with a fret saw.
-
07-02-2020 #45Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
07-02-2020 #46
If anybody wants to scan something using a camera on the machine with Mach3 then give this a try. It's old and unsupported but I've used it before to good effect.
https://www.sheetcam.com/Scanything/index
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stan Kern's creations and work examples using the Logic Trace software
By Stan Kern in forum Logic TraceReplies: 14Last Post: 31-01-2020, 04:02 PM -
NEW MEMBER: Hi from Stan in Ontario Canada
By Stan Kern in forum New Member IntroductionsReplies: 4Last Post: 25-01-2020, 10:04 PM -
EXPERIENCE: Non-paying RFQ, forum member 'Ptee'
By Jonathan in forum Trading Experience & FeedbackReplies: 0Last Post: 14-03-2014, 05:46 PM -
Supercomputer models one second of human brain activity
By Lee Roberts in forum General ComputingReplies: 8Last Post: 20-01-2014, 05:31 PM -
Recent eBay Ads in the Marketplace - An Explanation
By blackburn mark in forum Marketplace DiscussionReplies: 71Last Post: 22-07-2012, 12:44 PM
Bookmarks