Help VFD just took a dump!

[D-man]

Morning chaps!

So, my VFD has decided to crap out on me and in need of a replacement before monday ASAP. in the meantime i have 4 of the below VFD would these work and if so can somone help me get it wired up. start stop would be fine but would look at going into speed control.

my Spindle is a 4.5Kw

This is the inverter i have which is above the spindle the other ones are only 4s


Manual http://www.mke.co.uk/files/abbach550hvacusermanual.pdf

I will need to do a factory reset as this was installed on site for a pump

any help would be greatly appreciated!