. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 09-06-2014 #21
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    I'll save you a lot of headache and just say use 3Nm motors run at 65-70Vdc on 75-80vdc drives and you won't have any problems cutting anything.

    Cutting speeds will depend on many factors like spindle power and tool material but 4500-5000mm/min wouldn't be out the way with 2.2Kw spindle using carbide tooling.
    Reply With Quote Reply With Quote

  2. The Following 2 Users Say Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 7 users browsing this thread. (0 members and 7 guests)

Similar Threads

  1. Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
    By craynerd in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  2. Simple Solution- Drive 1" Ball Screw Shaft with NEMA-23-Size Stepper Motor Shaft
    By LoveLearn in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 08-02-2012, 01:52 AM
  3. Stepper shaft size and pulley bore size problem
    By psiron in forum Linear & Rotary Motion
    Replies: 13
    Last Post: 15-06-2010, 04:11 PM
  4. Motor size
    By Philmollatt in forum Motor Drivers & Controllers
    Replies: 8
    Last Post: 15-10-2009, 08:39 PM
  5. What stepper motor size (torque)
    By ZeroCount in forum Stepper & Servo Motors
    Replies: 5
    Last Post: 09-02-2009, 11:54 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules