Quote Originally Posted by bruce_miranda View Post
Anything I should try?
The wiring diagram for the motor is missing information. The colour coding shows A and A again rather than A and A'. About as useful as a chocolate teapot.

If the table is in sequence A,A',B,B' etc and the coils are shown the right way round then you are wired cackamamie.

I suggest you halve the current then disconnect one coil on either side.

If it vibrates forwards/backwards you're only driving one side. If it purrs around you had one or more of the disconnected coils in backwards.

When you have it purring, reconnect the other two coils by trial and error so it still purrs :D