I have the following NEW AND UNUSED Cutters:

6.0mm Ball nose: Hertel MEE-32236H TIN coated (RRP £13.50)
2 x 10.00mm Short 3 flute End Mill: Hertel MEE-10394A (RRP £10)
1 x 8mm long length HSS end mill (RRP £6.00)
10mm SwissTech SWT163-2130A 3 Flute 37° Coarse Pitch High Helix Roughing Endmills for Aluminium HSS-Co 8% (RRP £33.49)
10mm Ball nose Kennedy KEN1614090K 3 Flute ball mill (RRP £45.74)
2 x 14mm Ball nose (R7) HSS (RRP £13.50)
12mm Ball Nose (R6) HSS (RRP £13.50)
4mm Ball Nose (R2) HSS (RRP £7.00)
8mm Ball Nose (R4) HSS (RRP £7.80)

All or weldon, or straight shanked so ideal for Er collets..... the more expensive can be found on Cromwell/ MSJ industrial...

From a supplier these cutters are around £160, all of these are unused, in box's etc....

Offers for indavidual cutters.. condisered, but for ease would prefer to sell as a job lot....

Or Buy the lot for £100.00 (reasonable offers welcome)

Any questions please ask

Regards

James