Looking at getting some small parts machined using Brass.

[ryanlownie]

I have designed some small parts that need machining out of brass.

I'll cut straight to it, I'm no engineer and nor am I qualified in anyway to design such parts but I do have the basic understanding. The parts have been designed and modelled using Autodesk Inventor and saved as .ipt files, from there I have no clue where to go apart from supply that file to a potential manufacturer to process and move forwards.

If you feel that you could help me with this process and manufacture the parts, I would love to hear from you. Part files can be emailed to anyone interested.

I will need help with validating the parts and their possibility of getting made in the first place plus the odd minor question on the parts I am designing.

I will need 1 of each part made to test fitment and from there it'll be quantities starting at 10-15pcs and potentially more if it takes off.

I've never done anything like this before so please fire away with any questions you my have and excuse my naivety to it all :)

Photos:

http://imageshack.us/photo/my-images...teryblock.jpg/
http://imageshack.us/photo/my-images...sisinsert.jpg/

Dimensions:

The parts are around 1.5" wide from memory.