-
13-01-2012 #11
You do have speed control with that board. The info sheet implies your steppers are 2.4amp per phase and look like nema 34's. From the pics we can not get a good sense of the wiring so difficult to tell if it is possible to just drop the HPGL driver board for a normal bob? is there a parts manual for this at all? Bob's are cheap these days so worth a go before buying drivers i would say?
http://www.ebay.co.uk/itm/2608671872...84.m1423.l2649If the nagging gets really bad......Get a bigger shed:naughty:
-
The Following User Says Thank You to Swarfing For This Useful Post:
-
13-01-2012 #12
No this will be ok, if it was the other way round then it wouldn't work so good because your motors under full load would demand more current than the board could supply but your motors will only draw 1.7A max and the board can supply 2.2 if needed.
Edit: No scrap that I've just spotted there 2.4A wired Bi-parallel so your on dodgy ground.!!
Regards the motors they are 5 phase motors and ripping out the control would probably mean new motors as well because most modern drives only work with 2 or 4 phase motors.? . . . Luckly motors are cheap.!
-
13-01-2012 #13
2e0poz Can you please change your avitar.?? . . .She gives me a stiffy with every bounce. .
-
13-01-2012 #14
Sorry mate no can do....i just love my Nissan :dance:
If the nagging gets really bad......Get a bigger shed:naughty:
-
13-01-2012 #15
Jazz check the specs again, i count 8 wires unless i'm missing something?
Bounce, bounce, bounce, bounce....Brum brum................If the nagging gets really bad......Get a bigger shed:naughty:
-
14-01-2012 #16
-
14-01-2012 #17
-
14-01-2012 #18
Funny that, I never noticed the Nissan before. Guess I couldn't see the wood for the trees :lol:
A few beers in me now, but I can only count eight wires from each motor. Would that still make the Heiz controller dodgy?
Cheers,
Gavin
-
14-01-2012 #19
Wow, I had opened your link in another tab and have just seen it. I see what you mean, if that would do the job & connect to the driver board somehow I'd be flying!
Is there certain software needed to feed these boards or would the likes of Win PC-NC software do it? http://www.lewetz.de/download/hbwin2ecoe.pdf
-
14-01-2012 #20
It is rather distracting.
Those motors don't have much torque (1.5Nm) for nema 34. The datasheet only mentions A and B phases and 8 wires so looks like it's 2 phase. Standard 5-phase stepper motors are 0.72° step angle, whereas this one says 1.8° which is standard for 2-phase 200 step/rev. I've got a fairly big Nema 34 stepper motor lying around somewhere. You can get stepper drivers for them on eBay, but I just made a simple unipolar drive for it and it works. Never actually used it - one day I'll make a proper bipolar drive for it. It's a good candidate for my lathe I reckon...
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Looking for a copy of Burny/ITT WinAMC software for an AMC4 controllor/laser cutter
By whereditgo in forum Machine Control SoftwareReplies: 8Last Post: 27-10-2018, 10:29 AM -
DSP controller questions, Will this work well with Deskproto as my CAM software?
By chris in forum DeskProtoReplies: 7Last Post: 18-01-2014, 07:04 AM -
FOR SALE: SuperPID v2 (Closed-loop PID Router Speed Controller)
By Mad Professor in forum Items For SaleReplies: 18Last Post: 23-04-2013, 10:48 AM -
elu cnc 860 router software help
By willie walker in forum Machine Control SoftwareReplies: 0Last Post: 16-04-2013, 08:07 PM -
Reversed axis on a AXYZ 6010 after installing DNC controller software...
By RickyThunders in forum Machine Control SoftwareReplies: 1Last Post: 12-02-2013, 03:56 AM
Bookmarks