Off-cut required.

[Wal]

Hello,

I'm in need of a small piece of aluminium plate (either 15mm or 20mm thick) and about 10cmx5cm.

Anyone fancy donating a piece? I'll pay the postage, of course.

Give us a shout if you can help.

Thanks!

[WandrinAndy]

If you don't have joy here, it's nice to know that Forward Metals on eBay sell aluminium in dimensions that one would normally only find as off-cuts, such as:

Aluminium Flat Bar - 2" x 3/4" x 250mm Long | eBay

Cheers,
Andy

[Kn8]

Hi Wal

I have sent you a private message.

Kn8

[Wal]

Thanks for that link Andy - very helpful!

Wal.

[Jonathan]

Have you got what you need? If not then I've got plenty of 4"x5/8" flat bar. Is that any use to you?

[Wal]

Hi Jonathan,

Yeah, I think that Ivan's got what I'm after - I'll give you a shout should I need any more!

Cheers!

Wal.

[Chaz]

Have you got what you need? If not then I've got plenty of 4"x5/8" flat bar. Is that any use to you?

Sorry to hijack, I am looking for some 4inch square (or similar) Alu, around 100-150mm long. What do you have that I can buy?

Thanks

[Clive S]

Sorry to hijack, I am looking for some 4inch square (or similar) Alu, around 100-150mm long. What do you have that I can buy?

Thanks

Chaz you do realise that this post is over two years old. You can buy ali from http://www.aluminiumwarehouse.co.uk/

[Chaz]

Chaz you do realise that this post is over two years old. You can buy ali frohttp://www.aluminiumwarehouse.co.uk/

Crap, lol. Nvm then, thanks.