Thread: 2.2kw servo motor for spindle
Threaded View
-
24-09-2013 #1
Hi.
I have a small Sieg X1 mill and the spindle is very very weak. I want to upgrade it. For that i had a chance of buying a servo motor that powers the spindle of a Optimum BF46. My problem is to power it and control their speed in my mill.
The servo motor is this one:
The specs are these:
Model: 2200W brushless DC motor (MBL-123IM-300HA)
Input Voltage: AC220V
Motor Voltage: DC300V
Rated Current: 9.17A
Rated Speed: 3000rpm
No Load Speed: 3500rpm
Continuous Torque: 7.3N. M
Peak Torque: 14.6N. M
Rated Power: 2200W
Insulation: Class F
Certification: CE.
Can you help me finding the right servo driver for it?
ThanksLast edited by blayde; 24-09-2013 at 10:42 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
AC servo motor help !
By rnr107 in forum Stepper & Servo MotorsReplies: 35Last Post: 10-08-2015, 02:37 PM -
AC servo motor to replace a 3 phase induction motor on a mill spindle.
By rnr107 in forum Spindles & Drive MotorsReplies: 2Last Post: 23-04-2014, 03:14 PM -
What size servo motor do I need.
By Jonathan in forum Stepper & Servo MotorsReplies: 1Last Post: 31-03-2014, 09:16 PM -
servo as a spindle
By Swarfing in forum Stepper & Servo MotorsReplies: 2Last Post: 27-10-2010, 12:30 AM -
servo motor as spindle motor
By Scott in forum General DiscussionReplies: 1Last Post: 03-10-2010, 06:42 PM
Bookmarks