Thread: Driving me insane
Threaded View
-
25-03-2014 #3
Last Activity: 18-12-2023
It's good that you were able to try the screens connected at both ends then one end only and the fault was still there.
Are there any other programs running in the background on your PC ?
Are you using X and A selected as a slave ?
It might be a good idea to swap the driver boards around to see if the fault moves to the Y axis for example.Last edited by EddyCurrent; 25-03-2014 at 10:22 PM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Driving a Chinese spindle VFD from mach3
By jcb121 in forum Tool & Tooling TechnologyReplies: 5Last Post: 14-08-2013, 10:35 AM -
Nema17 motors driving 1204 ballscrews ...that ok?
By HankMcSpank in forum Linear & Rotary MotionReplies: 17Last Post: 24-06-2013, 09:39 AM -
Belt Driving your leadscrews !
By Lee Roberts in forum Lead Screws, Nuts & SupportsReplies: 11Last Post: 05-02-2011, 09:14 AM -
Driving floating end (ballscrew)
By blackburn mark in forum Lead Screws, Nuts & SupportsReplies: 16Last Post: 11-09-2010, 11:55 AM -
Driving 2 steppers from one driver?
By Dan Brown in forum Stepper & Servo MotorsReplies: 2Last Post: 20-12-2009, 07:26 PM
Bookmarks