scm tech 95l cnc machining centre User manual or parts lists

[george uk]

will do, i might have to scann it ( its big ), so i will do it friday or saturday.

Its ideal for kitchen and wardrobes. there are some special codes as part of the g-code, but nothing unusual. i think i have a copy of the setting disk and some other bits you will find usfull.

Tips

when servicing bearings and so, the parts manual does not always show you all clips and screws. I got stuck on the main X screw baring for a while. they are easy enough to service though

2. Take time to make sure you set the feet properly, so the the weight is spread over the full lenght ( stop any slight twist on long jobs ) even if you have had it stood for a while, true up the shape by adjusting the feet

final,,, saftey barriers and e-stops are a must on these type machines... they look fabulously dangerous whilst in operation. massive green iron comedy splatting type cnc machines